TTDT Stainless Steel Double Triangle Wall Ties | Tangle Free | BS EN846 | Suppliers UK
The traditional wall tie for domestic houses and small commercial buildings of up to three stories or a maximum 15m in height. Fully tested to BS EN 846-5:2000 the ties meet the requirements of BS EN 845-1:2003 and DD140: Part 2. They also meet the requirements of Part E of the Building Regulations for Type B in external walls.
 |
 |
 |
Technical Information
| Size | Cavity Width | Product Code |
| 200mm | 50mm to 75mm | TTDT 200 |
| 225mm | 76mm to 100mm | TTDT 225 |
| 250mm | 76mm to 100mm | TTDT 250 |
| 300mm | 76mm to 100mm | TTDT 300 |
| Classification | Field of use Type of structure and frequency of tying |
Geographical location |
| Type 2. (Masonry: General purpose). | Suitable for masonry cavity walls of domestic houses and small commercial buildings of up to three storeys, i.e. not greater than 15m in height, comprising two leaves of brick or blockwork of similar thickness in the range 90mm to 150mm. May be suitable for cavity walls having leaves of disperate thickness or stiffness or for cladding walls in high rise buildings, but should only be used in these situations if shown to be of adequate performance by calculation. Density not less than 2.5 ties per square metre. | Flat sites where the basic wind speed is up to 31m/s at an altitude no more than 150m above sea level. |
Our Product Range
CAVITY WALL TIES
> TIE SELECTOR
> MASONRY
> THIN JOINT
> TWO PART
> TIMBER FRAME
> U-VALUES
RESTRAINT TIES
MOVEMENT TIES
STARTER TIES
WALL PROFILES
REMEDIAL TIES
FIXING ANCILLARIES
HEAD RESTRAINT PRODUCTS
WINDPOST & BRICKWORK
SLIDING ANCHORS
CHANNEL SYSTEMS
MASONRY REINFORCEMENT
TIMBER CONNECTORS
PLASTER BEADS
BESPOKE PRODUCTS
Do you use
Facebook? Become a fan. Click
