Timber Connectors | TTLDS Light Duty Straps | Ties Timber to Brickwork | Suppliers UK

TTLDS Light Duty Straps
For vertical restraint against wind pressure and suction. Ties timber to brickwork or blockwork at floor level, eaves or ridge level.

Options
Made from 30mm wide x 2.5mm thick Galvanised Steel. Straps are available in stainless steel to
special order.

Fixing
In masonry, use hardened nails or wall plugs and screws. In timber use 8 swg x 75mm nails or No. 12 x 50mm wood screws. Where there is a gap between the wall and the joist running parallel to it, and a strap is being used across the joists, the gap should be packed and noggins provided between joists being secured.

Technical
Manufactured from galvanised steel. 
6mm holes at 25mm offset centres.

Ordering
Straps can be cut, bent and twisted to your requirements.
1. Type: Light Duty (30mm x 2.5mm) 
2. Overall length 
3. Distance to bends and twists - all from one end. 

Click here to download the technical pdf