top of page
Red Strip.jpg
TIMBER FRAME TIES RANGE
TTTF Anchor
Tectie TTTF banner cropped.jpg
TTTF STAINLESS STEEL TIMBER FRAME WALL TIES

The TecTies Timber Frame Wall Ties are manufactured with optimum design criteria to accommodate all types of timber frame structures.  They can fix brickwork or blockwork to the timber frame up to a maximum of 4 storeys and 15m in height.

Fully tested to BS EN 846-6:2012. The ties meet the requirements of BS EN 845-1:2013 as a Type 6 tie and meets the technical requirements of NHBC. It is recommended that TecTies Timber Frame Ties are installed at a density of 4.4 ties per square metre in buildings where the basic wind speed does not exceed 25m/s. This density should be increased to 7.0 ties per square metre in more severe situations.

All TecTies cavity wall ties are independently tested at Lucideon, a notified body number 1289 to comply with BS EN 845-1:2013. Underwritten by TZUS – Prague Notified Body Number 1020.

TTTF tie.png

TecTies Timber Frame Ties are supplied with stainless steel annular ring shank nails and manufactured in five sizes to suit 50mm, 75mm, 100mm, 125mm and 150mm cavity widths.

TTTP Test Results on 50mm cavity Timber Frame Wall Ties to BS EN845-1:2013

TTTP Test Results on 75mm cavity Timber Frame Wall Ties to BS EN845-1:2013

TTTP Test Results on 100mm cavity Timber Frame Wall Ties to BS EN845-1:2013

TTTP Test Results on 125mm cavity Timber Frame Wall Ties to BS EN845-1:2013

TTTP Test Results on 150mm cavity Timber Frame Wall Ties to BS EN845-1:2013

bottom of page